2009 April New Products

New RF Resistant Boundary microphones from USA

Astatic’s RF Resistance Architecture Reduces Unwanted Interference From Outside RF devices

In today’s wireless world the growing popularity of digital personal communication and data devices have increased the instances of Radio Frequencies entering an audio signal path. Cell phones, two-way radios, wireless internet routers and other wireless devices are becoming more popular in places where teleconferencing, recording and sound reinforcement systems are in use. The short, intense burst of radio transmission from these digital devices can enter the sensitive electronics of an audio system causing an undesirable sound. Since the microphone tends to be the forefront of an audio system and is used in close proximity to the digital communication and data devices your first line of defense is a microphone utilizing Astatic’s RF Resistant Architecture. Astatic is giving special attention to the design of the electronics as well as the microphone’s housing to minimize the reception of unwanted RF signals. As Astatic continues to develop new products compliant to AES 48, the same consideration will be applied to future models and classified within the RF Resistant Architecture trademark.


Astatic Microphones with the RF Resistant Architecture Trademark are AES 48 compliant. As with any system, RF resistance is only as strong as it’s weakest link. Proper system grounding is crucial to preserving RF resistance throughout an audio system. A bad link in the system ground can cause RF to penetrate the sound system chain. The use of foil shielded mic cable with a drain wire is not recommended. To successfully combat RF reception over your cable runs choose a multi-conductor cable with a braided shield extending the entire length of the cable. Observe proper termination techniques to guarantee the system ground is consistent through out the system. Be sure to use only those products and accessories that confirm to the standards set by AES and the Central European Standards organization. Look for the RF Resistance Architecture logo on the Astatic Products that are designed to combat unwanted radio frequency interference.


Boundary Microphones


Models 201R, 201RW - RF Resistant Cardioid Condenser Mini-Boundary Microphones

Boundary Series: 201R, 201RW
RF Resistant Cardioid Condenser Mini-Boundary Microphones Miniature installation cardioid "button" style condenser boundary mics for use in teleconferencing or voice lift sound reinforcement. Also may be used in surveillance, ambient recording or audio observation applications. Improved RF immunity to greatly reduce susceptibility to radio interference from GSM based cell phones, PDA/cell phones, cell phones with walkie-talkie capability and other similar devices.


Specifications:

Operating Principle:Electret Condenser

Polar Pattern: Cardioid

Frequency Response: 100Hz - 15kHz

Sensitivity: -36dBV (16mV) @ 1Pa

Impedence: 150ohms

Self Noise: 29dBA

Max SPL: 129dB, 1% THD

Power Requirements: P12, P24, P48, 2.4 mA

Models 202R, 202RW - RF Resistant Omni Mini-Boundary Microphones











Boundary Series: 202R, 202RW
RF Resistant Omni Mini-Boundary Microphones Miniature installation omnidirectional "button" style condenser boundary mics for use in teleconferencing or voice lift sound reinforcement. Also may be used in surveillance, ambient recording or audio observation applications. Improved RF immunity to greatly reduce susceptibility to radio interference from GSM based cell phones, PDA/cell phones, cell phones with walkie-talkie capability and other similar devices.
Specifications:

Operating Principle: Electret Condenser

Polar Pattern: Omnidirectional

Frequency Response: 80Hz - 10kHz

Sensitivity: -30dBV (32mV) @ 1Pa

Impedance: 150ohms

Self Noise: 26dBA

Max SPL: 125dB, 1% THD

Power Requirements: P12, P24, P48, 2.4 mA

Since you know it, why not install it now!

You know that RF transmission devices are surrounding you.

Astatic offers microphones and accessories to the professional, commercial and installation audio industries backed by over 75 years of innovation and experience.

ASTATIC Microphones come with 2years Warranty




Visit: http://www.astaticinstalled.com for More products to solve your installation worries!!














Designed for use in houses of worship, conferencing and public address.

The MG115 is 15 inches in length.
Applications: Choir, Podium, Boardroom/Conference.
MG115 Specifications
Operating Principle: Condenser
Polar Pattern:Cardioid
Frequency Response:150Hz to 20KHz
Sensitivity:-32dBV (25mV) @ 1 Pa
Impedance:440 ohms
Self Noise:26dBA
Power Requirements:P12, P24, P48, 5mA


Specifications are subject to change without notice.


CAD Microphones come with 2years Warranty

Galaxy Audio - Microspot VC ( Volume control) Passive

SPECIFICATIONS
MICRO SPOT VC (MSVC)
Frequency response: 300 Hz –15 kHz
Power handling capacity:100 Watts
Sensitivity: (1 watt @ 1Meter) 92 dB (1 kHz octave band)
Maximum SPL:(100 watts @ .5 meter): 117 dB
Speaker complement:One NEOLITE Neodymium, ferro fluid cooled 5 -inch drivers .86 lbs (.39 kg)
Nominal impedance:16 ohms
Input connection:Two ¼ -inch jacks wired in parallel
Enclosure Materials:High impact ABS plastic
Color:Black or white case with cloth covered ABS grille
Included:SA- 1 spun aluminum stand adaptor and mounting bracket included.
Dimensions: 7-inches x 6-inches x 5.125-inches (178 mm x 152 mm x 130 mm)
Volume control: 18 dB range; 7 positions at 3 dB each.
Net weight:2.7 lbs. (1.23 kg)
Shipping weight:3.2 lbs. (1.2 kg)

Also check out on HSVC, LP4M and other Galaxy Audio Audio products @ http://www.galaxyaudio.com/

email: audiobridge@yahoo.com.sg for more product informations

CAD Microphones in Singapore

Best selling Microphone( USB) - U1

If you need to record in a room, which is not sound proof, consider a Dynamic mic instead of a sensitive condenser. If you wish to record voice and not "voices" from someone else, a dynamic mic could be a better choice for you.

Best Selling Handheld Microphone ( Dynamic) - CAD22A

Comes with a balance xlr cable ( approx 15ft length) and a microphone clip;
Super Cardioid polar pattern with a 60 - 15,000Hz Freq Response and Sensitivity of -54dBV @ 1Pa.
CAD22A is something you should consider for Vocal and Instruments miking.

CAD Microphones come with 2years limited warranty
Check with our local dealer for pricings.
email: sales@hungbros.com for more info.

Trion 7000 Ribbon Microphone

Joe Satriani Guitar Amp Mic Pack - Includes one Trion 7000 Dual-element Ribbon Microphone and one D189 Supercardioid Dynamic Microphone
Pavane Recording Studio has recently added Joe Satriani Guitar Amp Mic Pack for studio recording work.

The Producer/ Engineer/ Director of Pavane Recording Studio tested out the mic personally and likes them.
He Bought them!! Thank you!!
http://www.pavanemusic.com/index.html

April 2009 New Products

Anchor Audio AN-30CP Lightweight Speaker Monitor Package

INCLUDES SB-30 WALL MOUNT BRACKET AND 6YEARS WARRANTY

STANDARD BLACK COLOUR.

(RED, BLUE YELLOW AND CLEAR COLOUR AVAILABLE ON INDENT BASIS)

The AN-30 speaker is the smallest system in the Anchor Audio line of products and offers a lot of sound in such a small cube. With 30 watts of rated power ouput, the AN-30 can cover a typical sized conference room or classroom with ease. The AN-30 is so lightweight at under two pounds that it mounts to a wall or ceiling quite effortlessly. Combine an AN-30 with a projector in a classroom for the perfect audio visual solution.

Galaxy Audio TV51/52 Wireless Speaker System

TRANSMITTER'S UNIQUE FEATURES;

1) 96 SELECTABLE FREQUENCIES,

2) MUTE BUTTON WITH NO "POPPING" SOUND,

3) MORE THAN 10HOURS OF OPERATING HOURS ON 2 X AA BATTERY**

4) MIC SENSITIVITY/ LEVEL CONTROL
5) 3 BAR BATTERY INDICATOR

HANDHELD AND HEADWORN VERSIONS AVAILABLE
WALL MOUNTING BRACKET AVAILABLE OPTIONAL

BATTERY OPERATED WIRELESS SPEAKERSALL INCLUSIVE PORTABLE PA SYSTEM Traveler TV5

The TV5 is the second newest addition to the Traveler Series. The TV5 is perfect for installed or portable applications. With its 30watt built in amp and compact size, the TV5 is perfect for projecting sound in a classroom and with its internal battery, it can still be used to make announcements during an emergency. The TV5 is customizable with up to 2 wireless mic receivers

- 5” speaker, and built in carry handle.
- Small in size for portability or fixed installation
- Built in battery (runs off of battery or AC)
- 30 watt power amp
- USB/MP3 player option
- Stand mount socket
- 5" Full Range
- Speaker Output
- AUX IN/OUT
- Master Volume Control

MADE IN TAIWAN

2009 March New Product for Musicians

We are glad to become a Konig & Meyer's ( K & M) dealer in Singapore.

With the increasing sales on our professional audio equipment over the years, enquiries on musician stands have also risen.

AudioBridge has been considering of adding a new product into our distribution line on microphone,speaker stands and audio related accessories to meet our clients need.


K & M is still the most popular and reputable stands manufacturer in the professional industry, even with the increasing numbers of stands manufacturer.

"Our own quality concept is the origin of our success.

From over 50 years of our history we know:

This is the basis, also for our future. From the R & D process to final quality-control inspection,

we control every aspect of the manufacturing process.

This relentless attention to detail ensures that every new König & Meyer stand is simply the best available anywhere."

We still believe that K & M delivers the best stands for musicicans as ever.

Visit: http://www.k-m.de for more informations on K & M Music Stands.

AudioBridge has been given the opportunity to distribute K & M products in Singapore officially and has set to fulfill our clients requests to supply and deliver.

We will stock, order and deliver if we and our products can meet your requirement.

Our April 09 shipment will include the following hot products!!

1) Monitor Stands - 26720-000-55 black (New Products!!)

Steel stand for monitors with 3-leg base, stable and solid. Height adjustable with a non-scratching locking screw and additional safety pin, internal cable routing possible.

Product Spcifications:

Support plate 205 x 245 mm with rubber bumps.

Load capacity: 35 kg.

Weight: 4.5 kg,

H: 680/1140 mm

2) Speaker Stands - 21435-001-55 Black
Standard speaker stand made with sturdy steel tubing. U-profile leg construction. Non-marring height-adjustment mechanism and »safety pin« security lock.
Product Specifications:
Extension tube diameter 35 mm.
GS-approved for loads up to 35 kg.

Wt: 5.3 kg,
H: 1320/2020 mm.

3) Speaker Stands ( Tripod) -21302-000-55 Black
Inexpensive version of model 213. With U-profile leg construction to reduce weight. With internal M10 thread.

Product Specifications: GS-approved for loads up to 30 kg. Wt: 7.2 kg, H: 1355/2150 mm.

4) Industry Microphone Stand - 21060-500-55 Black

Modern update of the classic 210/2. Zinc die-cast base with long folding legs. Special height-adjustment mechanism.

Product Specification:

Wt: 3.0 kg, H: 925/1630 mm, BL: 805 mm.

5) Overhead Microphone Stands- 21021-500-55 Black
Especially designed for studios and drummers. Taller and longer than most stands. Long legs fold for compact storage and easy transport.
Product Specifications:
Wt: 5.7 kg, H: 1120/2010 mm, BL: 1065 mm.

6) RoundBase Stand - 26010-500-55 Black

Cast-iron round base, with anti-vibration rubber insert for noise filtration.

Product Specifications: Wt: 3.6 kg, H: 870/1575 mm, base-diameter: 250 mm.

& others stands and accessories too!!

2009 CAD Professional Microphones

We are proud to represent CAD Professional Microphones in Singapore.

CAD products are now in Singapore!!

CAD Professional Microphones has been in the microphone manufacturing business for over 75 years. In the late 1980’s CAD introduced the first studio condensers to offer superior performance at an affordable price. Over the past few decades, the CAD name has become synonymous with innovative products, great value and superior sonic accuracy. CAD continues to be a highly regarded name for value and quality.

Visit: http://www.cadmics.com/ to learn more about our distributing products


CAD microphones are designed mainly for;



Live Vocal
D189- Super Cardioid Dynamic Microphone



Precisely circumnavigate an ultra-fine thread of conduction around high-energy neodymium. Bond to an ultra-low-mass diaphragm. Calibrate the secondary port such that maximum phase cancellation occurs +/-125 degrees off axis. Precede the primary port with a multistage, anti-turbulent blast filter. Finish with non-reflective polyurethane to ensure the performer remains in primary focus. Compare this microphone to the industry standards for tone, gain before feedback and handling noise rejection.

Mic clip and protective travel pouch are included.


Applications: Live Vocals, Brass, Guitar Cabinets, Bass Cabinets, Snare Drum.
D189 Specifications
Operating Principle: Moving coil dynamic
Polar Pattern: Supercardioid
Frequency Response: 40Hz to 18KHz
Sensitivity: -54dBV (2.0mV) @ 1 Pa
Impedance: 200 ohms
Specifications are subject to change without notice.
http://www.cadmics.com/D189.php



2. Voice Over
Trion 7000 Dual Element Ribbon Microphone



Thick and rich, the dual ribbon "rounds out" guitar stacks, brass, and woodwinds. A narrow strip of ultra thin aluminum suspended in a magnetic field oscillates symbiotically with your sound source. Electrical current is the result. We use two ribbons for added sensitivity. Experience classic ribbon vocal sound.



Elastic shock mount and metal travel case are included.

Applications :Studio Vocals, Voice-over, Acoustic Instrument, Brass, Guitar Cabinets, Strings, Piano.
Trion 7000 Specifications
Operating Principle: Moving ribbon dynamic
Polar Pattern: Figure-of-eight Frequency Response: 25Hz to 9KHz
Sensitivity: -53dBV (2.2mV) @ 1 Pa Impedance: 940 ohms
Specifications are subject to change without notice.

http://www.cadmics.com/Trion7000.php
3.Instruments
KBM412 - Cardioid Dynamic Microphone


You know how you need your kick drum to feel. Deep and powerful with a definitive attack.



The included mic clip provides additional isolation. Always tune before tracking.

Applications Bass Cabinet, Kick Drum, Rack/Floor Toms.
KBM412 Specifications
Operating Principle: Moving coil dynamic
Polar Pattern: Cardioid
Frequency Response: 30Hz to 12KHz Sensitivity: -66dBV (0.5mV) @ 1 Pa
Impedance: 60 ohms
Specifications are subject to change without notice.

e60 Cardioid Condenser Microphone

Externally-biased point-source transduction with high-power transformerless drive in a bulletproof road-ready housing. Take it on tour for high-impact instrumentation. Features include three-frequency hi-pass filter, 10dB attenuator and integral stand clamp. P24 (24V) or P48 (48V) phantom power is required.


1. Applications: Acoustic Instrument, Guitar Cabinets, Bass Cabinets, Strings, Piano, Cymbals/Overheads, Kick Drum, Snare Drum, Hi-hat.
   equitek e60 Specifications
   Operating Principle: Externally-biased condenserPolar Pattern: Cardioid
   Frequency Response: 30Hz to 20KHz Sensitivity: -41dBV (8.9mV) @ 1 Pa
   Impedance: 300 ohms Max SPL: 140dB, 1% THD, attenuator engaged
   Self Noise: 22dBA
   
   & more other microphones for Professionals need.

2008 Nov New Products

Sonosax

SONOSAX SX-R4:
NEW FIRMWARE RELEASES
Now featuring MIRRORING on CF Cardfor the SX-R4 - MINIR82
and the SX-ST / SX-VT Recorder!
WARNINGPlease read an important notice about the use of CF Card with SONOSAX Recorders

Le Mont, November 18th. 2008
IMPORTANT WARNING CONCERNING
THE USE OF CF CARDS

It concerns the SONOSAX SX-R4, the MINIR82 and the internal recorder of the SX-ST Mixer

This notice is to warn all users of SONOSAX recorders about a severe issue while recording simultaneously on the Hard Disk and some CF Cards that could lead to corruptions of audio files on both medias.
The problem is not constant and may appear randomly. It also depends on the type of CF Card being used. File corruptions have been reported with following cards:
- SANDISK Extreme III and SANDISK Extreme IV at any capacity
- TRANSCEND Cards

SANDISK Ultra II 2GB and 4 GB however seems to work fine as no problem have been reported.
SONOSAX engineers are currently working to solve this issue within the shortest possible terms.

In the mean time, we strongly recommend you not to record simultaneously on the HD and on the CF Card, or at least to fully test and try your CF Card before any important recording session.

SONOSAX will post a notice as soon as this issue is fixed.

-------------------------------------

Radial Engineering

Bones™ - Built for players that LOVE great tone! Bone's represent the evolution of the solid state pedal with low-noise 'Tonebone' circuits, pop free electronic switching and tough 14-guage steel construction.

TEXAS - Variable overdrive and tone Vintage to extreme overdrive range Dual mode for clean, rhythm & lead Compact to fit on any pedalboard Standard 9 volt power supply operation
( Power Supply not included)

TWIN CITY- Buffered ABY with Drag™ load correction Isolated output eliminates hum and buzz 180º polarity sets both amps in phase Compact to fit on any pedalboard Standard 9 volt power supply operation ( Power Supply not included)

LONDON - Multi-stage high gain distortion Modeled after 'British Plexi' half stack Dual mode for clean, rhythm & lead Compact to fit on any pedalboard Standard 9 volt power supply operation

( Power Supply not included)

FULLERTON - Variable drive gain distortion Modeled after 'American' tube amps Dual mode for clean, rhythm & lead Compact to fit on any pedalboard Standard 9 volt power supply operation

( Power Supply not included)

July 2008 New Products

Galaxy Audio

HDR2 Digital Recorder is HERE!!!!

This unit has the features to perform in a wide variety of recording situations. The HDR2 is small enough to fit in a pocket, briefcase, gig bag, backpack, or to just carry around in your hand.
The HDR2 features both a built in 128MB flash memory and an SD card port (supports up to 4GB SDHC cards.) The HDR2 will record in either WAV or MP3 formats. The WAV format offers your choice of six different sample rates. The mini USB 2.0 jack makes transferring data to or from a computer (either flash memory or SD) as simple as drag and drop. There are two internal microphones which may be used alone or in conjunction with the two ¼” inputs. These inputs include a switch to choose MIC, GUITAR, or LINE levels as well as rotary level knobs for fine-tuning. A three position switch (HIGH, LOW, or OFF) sets the internal mic level and allows a recording mix to be created between them and the ¼” inputs. The HDR2 features a stereo line output, stereo headphone output, and an internal speaker for playback.
The HDR2 is simple to use. Simply turn the unit on, select flash memory or SD card to record to, push record, and you're recording. The HDR2 will not allow a previously recorded track to be recorded over. Instead, it will automatically select the next available track. However, any track may be easily deleted and used again. Multiple file folders are available for storing different projects.
Records in high quality 44KHz WAV & MP3 formats
Built in stereo microphones
Stereo audio inputs (switchable to mic, line, or guitar levels)
Volume controls for input & output levels
Headphone output jack
Built in flash memory
SD card slot
USB port to connect to computer
Built in speaker for playback/reference
Uses 2AA batteries or USB power
Dims: 6” x 3.3” x 1”
Weighs: 0.5lbs
Include 1 x 2GB SD card

email for pricings

audiobridge@yahoo.com.sg

Rainman

The RAINMAN is made of a soft, lightweight batting that does not absorb water or matt up when wet. Instead, the rain drops simply slow down as they flow through and are channeled out the front. The exterior is net material with sturdy stitching and a Velcro closure. The RAINMAN easily slides onto most windscreens, and is secured with Velcro.
The RAINMAN goes on and off quickly and easily. To install the Rain Man, simply slide it on with the open end at the front of the microphone then close the Velcro slot.
In heavier rain, the RAINMAN may eventually take on water faster than it can channel it through. In this case, it may be a good idea to occasionally remove the RAINMAN and shake or wring the water out. With a little experience you will get a feel for when and how often this should be done. The RAINMAN effectiveness has been proven in actual production environments.
It is recommended that the RAINMAN be used without a furry wind cover. However, for added protection, a stretchy “sock” type cover may be used under the RAINMAN.

Current size fits:Rycote Windshield Kit 4 ( MKH416, MKH 60, CMIT 5U, KMR 81, CS-3e)The RAINMAN Will fit other Popular brands of similar sizing.