MozeGear The Tig28 Miniature Timecode Generator

MozeGear The Tig28 Miniature Timecode Generator

Wednesday, July 2, 2008

July 2008 New Products

Galaxy Audio

HDR2 Digital Recorder is HERE!!!!



This unit has the features to perform in a wide variety of recording situations. The HDR2 is small enough to fit in a pocket, briefcase, gig bag, backpack, or to just carry around in your hand.
The HDR2 features both a built in 128MB flash memory and an SD card port (supports up to 4GB SDHC cards.) The HDR2 will record in either WAV or MP3 formats. The WAV format offers your choice of six different sample rates. The mini USB 2.0 jack makes transferring data to or from a computer (either flash memory or SD) as simple as drag and drop. There are two internal microphones which may be used alone or in conjunction with the two ¼” inputs. These inputs include a switch to choose MIC, GUITAR, or LINE levels as well as rotary level knobs for fine-tuning. A three position switch (HIGH, LOW, or OFF) sets the internal mic level and allows a recording mix to be created between them and the ¼” inputs. The HDR2 features a stereo line output, stereo headphone output, and an internal speaker for playback.
The HDR2 is simple to use. Simply turn the unit on, select flash memory or SD card to record to, push record, and you're recording. The HDR2 will not allow a previously recorded track to be recorded over. Instead, it will automatically select the next available track. However, any track may be easily deleted and used again. Multiple file folders are available for storing different projects.
Records in high quality 44KHz WAV & MP3 formats
Built in stereo microphones
Stereo audio inputs (switchable to mic, line, or guitar levels)
Volume controls for input & output levels
Headphone output jack
Built in flash memory
SD card slot
USB port to connect to computer
Built in speaker for playback/reference
Uses 2AA batteries or USB power
Dims: 6” x 3.3” x 1”
Weighs: 0.5lbs
Include 1 x 2GB SD card
email for pricings
audiobridge@yahoo.com.sg


Rainman


The RAINMAN is made of a soft, lightweight batting that does not absorb water or matt up when wet. Instead, the rain drops simply slow down as they flow through and are channeled out the front. The exterior is net material with sturdy stitching and a Velcro closure. The RAINMAN easily slides onto most windscreens, and is secured with Velcro.
The RAINMAN goes on and off quickly and easily. To install the Rain Man, simply slide it on with the open end at the front of the microphone then close the Velcro slot.
In heavier rain, the RAINMAN may eventually take on water faster than it can channel it through. In this case, it may be a good idea to occasionally remove the RAINMAN and shake or wring the water out. With a little experience you will get a feel for when and how often this should be done. The RAINMAN effectiveness has been proven in actual production environments.
It is recommended that the RAINMAN be used without a furry wind cover. However, for added protection, a stretchy “sock” type cover may be used under the RAINMAN.







Current size fits:Rycote Windshield Kit 4 ( MKH416, MKH 60, CMIT 5U, KMR 81, CS-3e)The RAINMAN Will fit other Popular brands of similar sizing.

No comments: