Arriving in September!!1) Proco Sound DB2 Stereo Passive DIFeatures:
2 Discrete Channels In 1 Case
»»Passive- Requires No Phantom Power Or
»BatteriesGround Lift Switch
»»Separate 20 dB Pad For Each Channel
»»Low Noise Floor/High Headroom
»»Rugged Uni-Box Construction
Description:
The Pro Co DB2 is a passive direct box designed for professional live sound use, both on the stage and in the studio environment. Built from the industry standard DB1, the DB2 incorporates the same reliable design that has made the DB1 an industry icon with the convenience of two direct boxes in one case. The DB2 Boasts a low noise floor, high headroom, and a generous frequency response. Using Pro Co’s industry renowned DBT-1 impedance matching Transformer with dual electrostatic shields, the input signal is balanced and decoupled from the output. Other features include a ground lift switch to alleviate ground loops and separate 20dB pad switches for each input, to alleviate signal overload. As an added feature, the DB2 acts as a transformer isolated signal splitter when used with only one input, presenting the same signal to both outputs. The DB2 is housed in the Pro Co standard Uni-Box, making it an almost indestructible package while aesthetically matching previously purchased Pro Co products.2) Proco Sound DB1A 1 channel Active Direct BoxFeatures:»»Phantom Powered»»Transformer Balancing And Decoupling»»Input Clip Indicator»»Phantom Power Indicator »»Low Noise Floor/High Headroom »»40 dB, Two Step Pad»»Unbalanced XLR Input For Line Checking»»Rugged Uni-Box ConstructionDescription:
The Pro Co DBA1 is an active circuit direct box designed for professional live sound use both on the stage and in the studio environment. The DBA1 boasts a low noise floor, high headroom, and a generous frequency response. It also features a Phantom Power indicator light to confirm the presence of power on the mic cable and a clip light at the input to alert the operator when the input is being overdriven. Using Pro Co’s industry renowned MBT-1 Transformer with dual electrostatic shields, the input signal is balanced and decoupled from the output. Other features include a ground lift switch to alleviate ground loops, a two step 20dB pad switch for up to 40dB of signal padding to prevent signal overload, and an unbalanced XLR input for easy line checks. The DBA1 is housed in the Pro Co standard Uni-Box, making it an almost indestructible package while aesthetically matching previously purchased Pro Co products.Rolls DB225 Passive Direct Box Pro
Made in USAThe DB225 is a transformer balanced, passive professional direct box. It features a Ground Lift switch for hum elimination, and an Attenuator switch for padding the input signal from -20 or -40dB. Padding the input signal provides a way to connect the DB225 to a line level signal, even a speaker level signal and connecting it to a balanced line or Mic input on a mixer. The two 1/4 inch; inputs are paralleled pass-through to also send the input signal to a tuner, pre amp, etc..
PA202 Stereo 20w/ch class D amp
Lightweight but EFFICIENT
Small general purpose audio power amplifier for projector, ceiling mount, or rack monitoring. Works with 4 or 8 ohm loads. Has bridge switch for higher power mono and a limiter. Included 24 VDC inline IEC power supply.
